Balance Paper
Kurt Schubert's balance paper is specially designed as a backing for veneers.
Special kraft papers are impregnated and finished in-house.
80 / 120 / 160 / 220 g/m² with widths up to approx. 2200 mm are available.
The balance papers are also available colored (e.g. black).
Special variants are possible.
As well as edge material.
Pre-impregnated Paper
Decor papers that are impregnated with resin during production.
Main areas of application: As printing base paper for the printing industry.
These papers can also be used as backing papers without high balance paper properties.
Grammages: < 60 g/m² up to 140g/m²
Widths: up to approx. 2600 mm wide
Colors: From white to beige, brown,
grey and black
Primer Foil
Impregnated papers that can be coated.
Grammages: < 60 g/m² up to 140g/m²
Widths: up to approx. 2600 mm wide
Usually white / light beige but also available in other colors.
Finish Foil
Papers that are provided with different varnish qualities.
• Primer coating for overcoating
• Single lacquer coatings
• Lacquer coating with resistance to water and oil
Miscellaneous Papers
• Interleaving paper for boards, recommended surfaces, glass
• Vacuum paper 120-160g/m² as a milling underlay
• Carrier paper for painting systems to collect paint residues
• Various papers from raw to impregnated film
• BOPP release film, heat-resistant, good separation from phenol / melamine
Splicer Glue
The splicer glue is mixed with water and is then immediately ready for use.
Lignocoll 520 / 530 have been developed for standard veneer edge banding.
Lignocoll 540 also has a much higher resistance to moisture.
PVAC Glue
Liquid glue based on polyvinyl. Also called white glue.
Lignocoll 359
Very fast PVAC glue, PH neutral, D3.
Perfect for veneer gluing
Also available in black.
Lignocoll 393
D3 PVAC glue with Watt 91 in the acidic PH range.
Lignocoll 456
1 K D4 PVAC glue with Watt 91 in the acid PH range
The 359 and 393 are available in hobbocks (25 kg) and IBCs
Lignocoll 456 is only available in IBCs.